|
Project index
|
Parameter index
|
|
Input Power
|
AC 220V ±10% / 50Hz
|
|
resolution
|
AD：16bit；DA：16bit
|
|
Input Resistance
|
≥1MΩ
|
|
Input Power
|
709mW
|
|
Channel Features
|
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
|
|
Channel Control Mode
|
Independent Control
|
|
Voltage
|
Per Channel Voltage Range
|
25mV~5V；
|
|
Discharge Min Voltage
|
0V
|
|
Accuracy
|
± 0.05% of FS
|
|
Stability
|
± 0.05% of FS
|
|
Current
|
Per Channel Current Range
|
0.05mA~10mA
|
|
Accuracy
|
± 0.1% of FS
|
|
Stability
|
± 0.1% of FS
|
|
Power
|
Per Channel Output Power
|
0.05W
|
|
Stability
|
± 0.1% of FS
|
|
Time
|
Current Response Time
|
<20ms(0-Full Range)
|
|
Step Time Range
|
≤(365*24 )hour/step，
Time Form Support 00：00：00(h、min:s、ms)
|
|
Data Recording
|
Record Condition
|
Min Time：100mS
|
|
Min Voltage：10mV
|
|
Min Current：0.02mA
|
|
Record Frequency
|
10Hz
|
|
Charge
|
Charge Mode
|
Constant Current Charge、Constant Voltage Charge、
Constant Current and Constant Voltage Charge、Constant Power Charge
|
|
End Conditon
|
Voltage、Current、Relative Time、Capacity、-△V
|
|
Discharge
|
Discharge Mode
|
CCD、CPD、CRD
|
|
End Condition
|
Voltage、Current、Relative Time、Capacity、-△V
|
|
Pulse
|
charge
|
CCC、CPC
|
|
Discharge
|
CCD、CPD
|
|
Min Pulse Width
|
500ms
|
|
Automated Switch
|
Automated swith from charge to discharge for each pulse
|
|
End Condition
|
Voltage, Test Time
|
|
Cycle
|
Loop Measure Range
|
1~65535 times
|
|
Max Steps Per Loop
|
254
|
|
Nested Loop
|
Nested loop Function，Max Support 3 Layers
|
|
Protection
|
Software Protection
|
- Power-down Data Protection
|
- Off-line Testing Function
|
- Setting Protection Condition，Setting Parameter：Low Voltage limit、Upper Voltage limit、Low Current limit、Upper Current limit、Delay Time
|
|
Hardware Protection
|
Additional Anti-reverse Protection Model
|
|
Voltage and Current Testing Sample
|
Li-polymer connecting
|
|
Noise
|
<85dB
|
|
Database
|
MySQL Database
|
|
A Means of Communication of Upper Machine
|
TCP/IP Protocol
|
|
Data Output
|
EXCEL、TXT、Graph
|
|
Communication Interface
|
Ethernet Port
|
|
Per Unit Main Channels No.
|
8
|
Features and functions
1.Voltage output up to 110V, current output up to 3000A，Wide range of applications (cycle, formation, grading, over charging/discharging)
2.High-precision channels for energy storage materials research and standard battery charge/discharge test.
3.Unit is suitable for cylindrical cell, and prismatic cell，pack
4.Completely independent channels allow users to run multiple independent tests simultaneously without affecting other channels
5.we supply free the BTS client software, and analyze software,you will get all the result in curve formant (Charge discharge curve) for each cell
6.Work without computer mode, up to 1GB testing data storage capacity
7.BTS-5V3A is design for 3 Ampere charge discharge current,if you need 6Ampere charge discharge current,then choose BTS-5V6A
Specifications
◆Input Power: AC 110V/220V/380V ±10% 50Hz/60Hz
◆Output Range: 0 - 110V
◆Resolution: AD(16bit); DA(12bit)
◆Control Accuracy: ±0.1% of FS
◆Measuring Accuracy: ±0.1% of FS
◆Rise Time: ≤20ms (10%-90% Current)
◆Data recording rate: 1Hz(Max), △T/△U/△I
◆Operating modes: Charge- CC(Constant Current),CV(Constant Voltage), CC&CV
Contact:Mathew
Email:qiandunyao@neware.com.cn
Mobile:8613612950946
Skype:damon.mathew
